All guides
For Vendors

Breaker Tripped Mid Rush? Add Up Your Booth Power First

By Atlanta Foodie Festival3 min read
Stack of appliance blocks rising past a red power limit line beside the words Breaker tripped mid rush, add up your power first

Your fryer, warmer and card reader all run at once, and the power cuts out in the middle of the lunch rush. A two minute check before festival day can keep that from happening.

Planning to sell at the Atlanta Foodie Festival? Learn more and apply as a vendor.

The problem: everything runs at once

At home you switch things on one at a time. In a booth, the cooker, the warmer, the cooler and the lights all draw power at the same moment, right when the line is longest. A circuit can only carry so much. Go past it and the breaker trips, the line stops and so do your sales.

The simple math

Every appliance has a label that lists its watts or amps. To turn watts into amps, divide by the volts. Standard outlets in the United States are 120 volts, so a 1,800 watt griddle pulls 15 amps on its own.

A common rule of thumb is to keep equipment that runs for hours under about 16 amps on a 20 amp circuit. That leaves less room than most vendors expect.

A quick example

Say your griddle is 1,800 watts, your warmer is 500, your cooler is 300 and your lights and card reader add another 100. That is 2,700 watts, or 22.5 amps. It is already past the 16 amp comfort zone on one circuit, even though every item is a normal size. This is how a reasonable looking setup still trips a breaker.

Run your numbers

Enter the watts from the label on each item. The starting numbers are only examples, so replace them with your own.

Booth power load estimator

Total watts2,700 W
Amps at 120 volts22.5 A
Share of a 16 amp safe load141%

Planning estimate only. Check each label and ask a licensed electrician about your setup. Over 100 percent means your load is too high for one standard 20 amp circuit.

Learn more and apply as a vendor

Four ways to lower your load

Preheat early. Heat your heavy items before the rush so two big draws are not starting from cold at the same moment.

Check the labels before you buy or rent. Two machines that cook the same food can pull very different watts.

Switch to LED lights. They use far fewer watts than older bulbs, which leaves more room for the equipment that makes money.

List what must run all day. Your cooler and card reader come first. Everything else fits around them.

Skip the extension cord mistakes

Use outdoor rated, heavy duty extension cords sized for your load, and never chain power strips together. A thin cord can overheat even when the breaker holds.

Tell the festival what you need

If you plan to use power at your booth, plan for it before festival day. Power access is arranged with the festival, so include your equipment list when you apply and check the vendor page for current details.

Ready to sell without the blackout?

A clear power plan is one more reason customers stay in line instead of walking away. Learn more and apply as a vendor.

ShareXFacebookEmail

Ready for the next step?

Learn more and apply as a vendor